Peugeot 308 Key Fob Problems and How to Fix Them
If your Peugeot 308 key fob has stopped working for a while it could be due to a dead coin battery or water damage and receiver module issues or a faulty electronic chip. Fortunately, these issues are easy to fix and you'll be able to get your vehicle back to normal in no time at all!
Car keys can also get damaged due to the fact that the blade on the key gets worn. You can solve this issue by visiting your local Car Key Man Auto Locksmith to get a new blade installed.
Battery
The battery for the key fob in your Peugeot 308 can sometimes die or become weak enough to send an effective signal to the car. This can cause the key fob's function to cease and prevent you from locking or opening the doors or starting your engine. To fix this, you'll have to replace the battery inside the key fob.
You can purchase a new battery at an auto parts shop, or at your local hardware store. When you purchase the battery, make sure that it's brand new and hasn't been on the shelf for a long time. A fresh new battery will have more capacity and will be able to send a stronger signal the car.
After replacing the battery, try unlocking the doors and locking them with the key fob. If the doors do not unlock, it's likely that the receiver module in the car is the culprit. Your local Peugeot dealer can reprogram the receiver module.
The internal chip of the key fob may also be damaged. It's possible to damage your key fob if you drop it on the ground, or expose it to water. Rubber seals that protect your chip from moisture may get worn out over time. This is especially the case when you expose your key fob to water for prolonged periods of time, like submerging it at the beach in the ocean. To prevent this from happening, it's important to keep your key fob free from moisture and never let it come in contact with water.
Water Damage
If your key fob gets soaked in water, regardless of whether you dropped it in the pool or threw it into a puddle don't think it's a lost cause. The key fob is protected by rubber seals but prolonged exposure to water could affect the electronic chip. Because water is an excellent conductor and conductor, any water that is able to get inside the key fob may result in a series of short circuits, which could eventually damage the chip. After removing the batteries, clean the contacts with isopropyl. Dry them completely before putting them back into.
A dead battery can also be the reason that your Peugeot 308 won't start. Jumper cables are a fantastic option to restart the engine in case you have an additional vehicle. If the battery is faulty the battery must be replaced.
Another possibility is an ineffective receiver in the vehicle, which may hinder it from receiving a signal from the key fob. The key fob may be damaged or there might be a problem with the antenna, wiring or even the key fob itself. It is possible to program a new fob into your vehicle if using one. If you're unable to solve the issue, contact an expert technician. A technician who is trained in the field will be able to determine the issue quickly and then fix it right away.
Radio Interference
Signs like key fobs not being recognized or having a restricted range typically indicate that there is a problem in the system. This can be either radiated, or conducted, with the latter resultant from power supply cables or speaker wiring passing too close to electrical components. Generally, re-routing the cables or moving them away from the components may solve the issue.
It's unlikely that anyone is listening in on your key fob's signals to steal your car, but it is possible that the signal is being distorted by radio frequency interference. Fortunately, this is easy to repair.
If peugeot 308 key replacement is not being recognized by the system, you can try a new battery. Also, make sure that the battery is the right type and size. Batteries of the wrong dimensions can harm your battery.
These devices could interfere with the key signal if they operate on the same radio frequency. Do not connect these devices to your key fob.
Pairing Issues
A car's remote keyless entry system is an antenna that receives radio frequency signals from the key fob. If the receiver is experiencing a problem, you won't be capable of starting your car, even if the key fob functions and can be reset. The issue can be caused by a range of things, including a dead coin battery and water damage. The receiver may also be malfunctioning as a result of an error in the software or internal damage to the key itself.
The battery inside your Peugeot 308 keyfob has probably failed. The battery can be replaced, however you must ensure that it's the correct battery for your key fob. It is recommended to use an item that has the same size as well as voltage and specifications as the original.
Your Peugeot 308 keyfob may not work if it has been associated with a different vehicle. You might have accidentally given your key fob someone else or it was used to unlock other vehicles. This can be resolved by reprogramming the key fob with an OBDII scanner. This tool will ask for information about your car, like its VIN or engine type. It is vital to enter the correct details.